Tube Laser Cutting Machine Description
The RL-T Fiber Laser Tube Cutting Machine can accurately cut many types of metal. This powerful tool can handle everything from common steel to aluminum, copper, brass, and many other metal sheets and plates, making it a perfect choice for a wide range of metal processing. The machine can cut holes, letters, patterns, and straight lines. It can cut both round and square tubes, giving factories the speed and precision needed for many different jobs.
The machine helps workers cut metal from different angles. It is used in many important industries such as automotive manufacturing, kitchen equipment manufacturing, and metal door production, where precision and speed are of the utmost importance. The RL-T Fiber Laser Tube Cutting Machine can easily cut thick and thin materials. Its special design allows factory workers to quickly switch between different cut types, saving time and money.
The machine is an important tool in the modern factory. You can see it being used to make electrical cabinets, elevators, escalators, and many other metal products we use every day. The RL-T Fiber Laser Tube Cutting Machine can help workers do their jobs better and faster. This cutting system brings the latest technology to workshops and factories in a variety of industries, helping them to manufacture high-quality products efficiently and reliably.
Tube Laser Cutting Machine Advantages
The RL-T fiber laser tube cutting machine is a leader in cutting metal tubes with extreme cutting accuracy. Its sturdy base frame is constructed from one piece and heated in a special oven so it won’t wobble or wear out over years of use. The machine uses a high-quality laser that can run for more than 100,000 hours. The laser converts 30% of the electricity used into cutting power, which saves electricity, which means lower bills and better results.
The machine doesn’t require much maintenance or repair. It can cut a wide range of tube sizes, from small tubes as small as 20 mm in width to large tubes up to 220 mm, as well as special shapes such as I-beams and angles. The cutting head is designed with a special tip so it won’t hit the tube when making tricky cuts. The smart system checks itself while cutting to make sure everything remains perfect, and even makes cool spots and sharp corners when needed.
The machine can handle materials on its own and prevent problems. It cuts quickly, saving money while providing excellent results that quickly pay for the cost of the machine. The chuck (the part that holds the tube) automatically centers the tube and holds it securely, saving time and ensuring the cut is always correct. This machine looks clean and simple and meets the strict standards of Europe and the United States. All parts work smoothly in one system, making it easy to use and durable enough to be used in factory cutting tubes for many years.
Tube Laser Cutting Machine Configuration
Strong machine lathed bed
The lathed bed is after aging
treatment: 1600℃high temperature heat treatment, 24 hours with furnace cooling and precise co2 protection welding, which ensures along-term stability and no deformation.
Pneumatic Chuck Design
The front and rear chuck clamping design allows easy, wear-free installation, ensuring stable feeding and precise cutting. Automatic center alignment and high chuck rotation speed boost efficiency across various pipe types
Raytools Auto-focus laser head
1. Famous brand in China.
2. Laser cutting head with high precision fiber laser dedicated anti-collision cutting head to ensure high cutting accuracy and cutting efficiency.
Inovance Servo motors and drivers
Ac servo motor Improve machine transmission performance.
Max Laser Source
100,000 hours life time.
More stable and cost-efficient Free maintenance
HIWIN guide rail / YYC X/Y axis gear rack
(1). Strong bearing capacity
(2). Fast moving speed
(3). High positioning accuracy
(4). Large power for transmission
(5). Long-life, Smooth operation, High reliability
Industrial Water chiller, Cooling laser device
Protect the the laser device in normal temperature, avoid moisture condensation.
Cooling laser head:When machine working, laser head will produce large heat, water chiller cooling laser head to make sure the lens and mirrors avoid breaking because of the heat.
Cypcut control system
Cypcut controller is designed for sheet metal processing industry launched a full-featured open loop control system.Easy installation, easy adjustment, excellent performance, complete solutions, which is a popular fiber laser cutting machine control system.
| Model | RL-T fiber tube laser cutting machine |
| Working Area | 3000mm*1500mm |
| Laser source | 3KW Max Laser Source |
| Control System | Cypcut 2000E |
| Laser head | Raytools BM110 Autofocus Laser head |
| Machine bed | Rise Laser |
| X/Y axis gear rack | YYC(Taiwan) |
| Precision linear guide | HIWIN |
| Motor Drive | Inovance |
| Electronic components | France Schneider |
| Reducer system | MOTOREDUCER |
| Pneumatic component | Japan SMC |
| Machine bed accessories | Rise Laser |
| Water chiller | Hanli Water chiller |
| Waste recycling equipment | Rise Laser |
| HS Code | 8456110090 |
Tube Laser Cutting Machine Parameters
| Effective round tube cutting range | Diameter 15mm-320mm |
| Effective tube cutting length | 6000mm |
| Maximum total load of chuck | 600kg(less than 200kg can run at full speed,more than 200kg needs to run at reduced speed,600kg needs to be reduced to 30%-50%of full speed) |
| Workbench axial positioning accuracy | ≤0.05mm/1000mm |
| Workbench repeat positioning accuracy | ≤0.03mm |
| Laser Source Power(Optional) | 6kW |
Shipping
Scenario 1: If you have a freight forwarder in China, we will ship the product directly to their location.
Scenario 2: If you have customs clearance experience, we can help you connect with a freight forwarder.
Scenario 3: If you lack customs clearance experience, we offer DDP service, allowing us to find a professional forwarder to deliver the product straight to your door.
Why Choose Us
Q: Can you make changes to the tube laser cutting machine to fit what I need?
A: Yes, we can change the laser cutting machine to work better for you. We can adjust things like the size of the machine, how powerful it is, and what extra features it has to match exactly what your factory needs.
Q: What kinds of metal can the laser tube cutter cut?
A: The laser tube cutter cut can cut many types of metal. It works with regular steel, stainless steel, aluminum, brass, copper, and many other metals, plus it can cut different shapes of pipes like round ones, square ones, and even special shapes like I-beams.
Q: How do you make sure your cutting machines are good quality?
A: We build our machines with very strong frames. These frames are heated in special ovens to make them last longer, and we buy the best parts we can find, like lasers from other countries and special cutting tools, so the machine will work well for many years.
Q: How long is the warranty?
A: The whole machine has a one-year warranty. The most important parts, like the laser and cutting head, have a two-year warranty, and we’ll fix or replace any broken parts for free if they break because we made them wrong.
Q: How long do I have to wait after I buy a fiber laser cutting tube machine?
A: Regular fiber laser cutting tube machines take 15-20 days to get ready. If you want special changes to your machine, it might take 30-40 days before we can send it to you.
Q: Will you teach us how to use the machine?
A: Yes, we’ll teach your workers everything they need to know. We can show them how to set up the machine, use it safely, and take care of it, either at our factory or through video calls, and we’ll give you books and videos that explain everything clearly.